1Turn-key
Entrance and collector roads
Cammi
Our full-size street light, for the main way in and the busier roads. The panel and battery cabinet sit apart from the fixture.
- Up to 150 W and 25,000 lumens
- Up to 460 W and 66,200 lumens dimmed
For residential developers
Utility reliability. No grid build-out.
The most reliable and cost-effective way to light a new community without the grid. Our team monitors, manages and troubleshoots every light, often before anyone knows there's an issue. You hand the condo corporation or residents' association a working service with 99.5% average uptime, not another system to run.
◷
Lit the week the road is paved
Each light runs on its own solar and battery. No waiting on the transformer.
A new subdivision road, lit before the houses went up
99.5%Average managed uptime
55+Countries deployed
6.4M+Days of operating data
24/7Monitored and maintained
Trusted by communities across Canada
One supplier for the whole plan
What goes where on your development
Pick what you're lighting to see the system we use for it, or send us the plan and we'll match every part of it for you.
2Turn-key
Local streets and courts
Cammi Lite
The compact version of Cammi, sized for local roads, courts and crescents where the traffic is residents.
- Up to 40 W and 7,200 lumens
- Up to 80 W and 13,000 lumens dimmed
3Turn-key
Parks, paths and parkettes
Senti and Senti Ampio
Panel, battery, light and controller in one unit. Nothing to trench through the parkland. Ampio carries a larger panel for brighter paths and small lots.
- Senti: up to 9.6 W and 1,600 lumens
- Senti Ampio: up to 24 W and 4,200 lumens
4Turn-key
Exposed or low-sun sites
Vento
Cammi with a 300 W wind turbine added. For open, windy land or sites where winter sun alone runs short.
- Up to 150 W and 25,000 lumens
- Solar plus a 300 W vertical axis turbine
5Power only
A fixture is already specified
Power Pack
If the municipality or your designer has already picked the pole and light, keep them. Power Pack adds the solar, battery and controller.
- Power Pack Lite: up to 40 W
- Power Pack: up to 150 W, any AC, DC or driverless fixture
6Turn-key
Gatehouse, sales office, amenities
Pico and Pico Plus
Solar power for the equipment around the lights: security cameras, WiFi, sensors and gate equipment, with no power run to the pole.
- Pico: WiFi hotspots, sensors, IoT
- Pico Plus: cameras, satellite modems, gateways
Turn-key systems come with the pole, light arm and fixture from us. Power only systems power a pole and fixture you or the municipality specify. Figures are datasheet maximums. What a light can actually deliver depends on the site, so we size every system to its exact location before we quote.
How it works
A street light that runs itself
Each pole carries its own solar panel and battery, so it never touches the grid. What makes it work through a Canadian winter is the software deciding how hard to run tonight.
☀
Solar and storage on the pole
No trench, no conduit, no meter and no hydro bill. The panel charges a lithium battery sized for your latitude, and the light runs from that all night, every night.
◉
Managed 24/7 through Illumience
Our cloud platform watches every light, reads local weather, and dims or brightens ahead of a bad week so the battery never runs flat. You see uptime and faults without sending anyone out.
◎
Engineered for your exact site
We lay out every pole for the site you actually have, then validate the design for 365-day availability before you buy, so you know it works before it goes in.
◈
Energy as a Service: power anywhere, for a fixed cost
We become your utility. You get power at a fixed, predictable cost with no grid connection needed, anywhere in the world, and we handle the rest: installation, 24/7 expert management, monitoring and weather-based optimisation. Installation is cheaper too, because there is no trenching, no conduit and no utility extension to pay for or wait on.
Why developers use it
Three things it takes off your critical path
Street lighting usually waits on the utility. That makes it one of the last things finished and one of the easiest things to slip.
◷
Light a phase before power arrives
You don't wait on the utility. Poles go in when the road does, so the first homeowners never move into a dark street.
⬡
No trenching, no utility extension
Nothing to dig, no conduit, no transformer. That removes a line item and a long-lead dependency from the servicing budget.
$
Hand the community a service, not a liability
Every system comes with Energy as a Service: a predictable annual fee, with batteries, controllers and panels replaced at no extra cost while it's active. The residents' association inherits a lower-cost utility service, not a repair bill when a part wears out.
99.5%
Average managed uptime
80%
Fewer on-site visits
30-40%
Lower total cost over the life of the system
3 yrs
Energy as a Service included with every system
In the field
Running on real roads and paths today
Highways, park paths and waterfronts across North America. Every one of these runs without a grid connection.
Beowawe, Nevada
Nevada DOT specified
Duncairn Park, Mississauga
No trenching required
Queenston, Ontario
All-in-one, just add a pole
Canadian made product, designed and engineered in Toronto.
Send us the site plan
Tell us what you're lighting and roughly how many poles, and we'll come back with the right system for each part of the plan, a layout and a price in Canadian dollars.
✓A Canadian engineer replies within one business day
✓Every road, street and path matched to the right system
✓No trenching, no utility extension, no hydro account
✓Priced in Canadian dollars and shipped inside Canada
Request a quote
Takes about a minute. No obligation.